Category Archives: Automated optical inspection systems

automated optical inspection systems(AOI)

Automated Optical Inspection India

Sipcon’s AOI system, Part Quickie uses machine vision and a smart software to give product Pass/Fail decisions in one second. source Why’s Solder Paste Inspection Pretty important? Solder Paste Inspection is mainly accomplished to examine the solder paste deposits in the Printed Circuit Board (Circuit Board) fabricating process. It is observed that almost all the […]

MVP AOI – Automic optical inspection, The Best AOI in the world from Machine Vision Products

MVP’s Automated Optical Inspection (AOI) solutions provide the highest level of defect detection for electronic and semiconductor manufacturers. Our mission is to provide both electronic and semiconductor manufacturers with the finest, most advanced AOI and process control technologies available. MVP’s leading software tools provide ease-of-use without the loss of inspection quality, and uniquely provide our […]

The laser based alternative to automated optical inspection systems (AOI) – Amfax a3Di

View the Amfax a3Di PCB inspection system in action source Why is Solder Paste Inspection Fundamental? Solder Paste Inspection is usually completed to check the solder paste deposits in the Printed Circuit Board (PCB Board) manufacturing process. It is known that almost all solder joint defects in a PWB assembly are caused by incorrect solder […]

AOI + AXI Combination

Combine the best of 2 inspection worlds with the Viscom X7056. The system will simultaneously inspect with AOI and AXI. Space and programming saving solution for total quality coverage. More info via www.viscom.com/europe/products/solder-joint-inspection-aoi/x7056rs-axiaoi/ source The thing that makes Solder Paste Inspection Imperative? Solder Paste Inspection is usually completed to check the solder paste deposits in […]

Nordson YESTECH BX AOI Demonstration

Nordson YESTECH’s advanced 5 megapixel color camera imaging technology offers benchtop PCB inspection with exceptional defect coverage. This benchtop system inspects solder joints and verifies correct part assembly enabling users to improve quality and increase throughput. The optional four side viewing cameras add additional inspection capabilities found only on in-line systems. source The thing that […]

PCB Optical Inspection System in Action

This is a PCB inspection system optically inspecting circuit boards using 5 cameras and a lighting dome for defects as the PCBs come off the manufacturing line. You cell phone is tested by this machine! source Why’s Solder Paste Inspection Indispensable? Solder Paste Inspection is primarily carried out to examine the solder paste deposits in […]

VITRONIC – VINSPEC – Fully Automated, Optical Surface Inspection

VINSPEC machine vision systems objectively and reliably inspect the surfaces and edges of flat and structured parts for deviations, flaws and functional defects. The fully automated 100 percent inspection and objective defect classification enable the implementation of a zero defect strategy at production speed and high throughput. Please contact us for VITRONIC’s Fully Automated, Optical […]

X3 In-Line Automated X-Ray Inspection (AXI) Inspection System

The X3 is a production in-line automated x-ray inspection system for up to 100% inspection of solder joints on both single and double-sided printed circuit assemblies. Utilizing both transmission and off-axis imaging, the system can be setup flexibly depending on the SMT process to inspect Side A then Side B, or the Double-sided assembly. While […]

Automated optical inspection of DEA’s PCB

[ENG] Automated optical inspection od DEA’s printed circuit boards [ITA] Controllo ottico automatizzato dei circuiti stampati DEA source Why’s Solder Paste Inspection Vital? Solder Paste Inspection is usually completed to check out the solder paste deposits in the Printed Circuit Board (PWB) manufacturing course of action. It is observed that almost all solder joint defects […]

How to create offline programs for SPI and AOI in 5 minutes?

This video describes the methodology to easily create offline programs for SPI and AOI from Gerber file, CAD file … using SIGMA Import software. It takes 5 minutes. source Why’s Solder Paste Inspection Important? Solder Paste Inspection is mainly carried out to examine the solder paste deposits in the Printed Circuit Board (Printed Circuit) fabrication […]